A battery revolution could make electric cars a reality for everyone

Metallic lithium will make batteries lighter and more powerful.

This article is an installment of The Future Explored, a weekly guide to world-changing technology. You can get stories like this one straight to your inbox every Thursday morning by subscribing here.

The push to transition to electric vehicles is getting stronger — General Motors, Ford, and Volkswagen have all made the pledge to ramp up the production of electric, zero-emission vehicles by the 2030s.

Right now, EVs make up only 3% of new car sales globally. That’s because for many consumers today, EVs are simply too expensive and too much of a hassle to fuel up compared to gas-powered cars, thanks largely to the lithium-ion batteries used to power them.

For EVs to really catch on and help lower carbon emissions, many experts say it’ll take more than a pledge from major automakers. We’ll need to develop a whole new type of battery — and lithium-metal batteries may hold the answer.

The Problem With Today’s Batteries

The EVs produced today use lithium-ion batteries, the same type of battery that’s in your computer or smartphone. These batteries have enabled us to do things we once thought impossible — like power our devices on-the-go.

However, they do have a few major shortcomings: they’re expensive, heavy, and can die quickly. (Also, in electric vehicles, they’ve been known to occasionally burst into flames in the event of a collision. Yikes.)

Batteries using metallic lithium are lighter weight, can run twice as long, and hold more energy than most of today’s batteries.

Lithium-ion batteries are made up of two different materials on each end — called electrodes. One is negatively charged (the anode) and the other is positively charged (the cathode). In between these materials is a liquid chemical (the electrolyte) that carries the ions back and forth between the two oppositely charged ends, creating an electrical current that flows out to whatever device you’re trying to power.

With lithium-ion batteries, the negatively-charged electrode is usually made from graphite. The main problem with graphite is that it’s big and heavy — and it doesn’t actually contribute to the battery’s overall energy production.

But if we could create a battery where every electron could be put to use creating and storing energy, it would be a lot lighter and more powerful.

Enter: lithium-metal.

Promise of Lithium-metal Batteries

Metallic lithium, the lightest metal on the periodic table, is considered the holy grail of battery material because it has the highest energy density. Batteries using metallic lithium are lighter weight, can run twice as long, and hold more energy than most of today’s batteries.

Because lithium-ion batteries use heavy graphite instead of lithium metal, they’re at a disadvantage when it comes to energy density. Unlike graphite, metallic lithium isn’t just dead weight — it’s actually contributing to the battery’s overall energy production.

But there’s a hitch with metallic lithium: it’s super reactive. Being in contact with any liquid, including an electrolyte (the chemical used to transport the ions back and forth) can degrade the battery by causing tiny crevices, called dendrites, to form. These dendrites can short-circuit the cell, potentially causing it to combust.

Solid-state batteries could lower costs and improve the safety of electric vehicles.

This is the big reason why you won’t find lithium-metal batteries in your Tesla or electronic devices.

If they’re going to be the next big thing in battery innovation, researchers have to create an electrolyte that won’t degrade the metal yet still allows the ions to easily pass through it.

That’s a tall order — but the solution is likely a solid electrolyte.

The idea of a solid-state battery is decades-old. However, so far, no one’s been able to make it practical.

But QuantumScape, a battery startup that spun out of Stanford, now claims to be doing just that.

From Liquid to Solid

QuantumScape is being tight-lipped about what exactly makes up their new solid-state electrolyte — the only thing the company will say is that it’s a ceramic, according to MIT Technology Review.

CEO Jagdeep Singh told MIT that the company’s batteries will help make EVs a commercial success: they will lower costs, improve driving range, shorten charging times, increase lifespan, and improve safety.

“Any battery that can meet these requirements can really open up the 98% of the market in a way you can’t do today,” he said.

Internal data released by the company shows that a single-layer solid-state battery can charge up to 80% capacity in less than 15 minutes. (For comparison, in 2019, Tesla was able to charge a Model 3 from 5% to 90% in 37 minutes). It also retains more than 80% of its capacity after 800 charge cycles and, importantly, it doesn’t allow dendrites to form and is non-combustible.

“QuantumScape has set me back on my heels,” Nancy Dudney, a battery researcher at Oak Ridge National Laboratory, told MIT’s James Temple. “At first view, it looks really good.”

QuantumScape’s results so far, while impressive, are limited. After 10 years of work, the company has only published tests that were conducted on single-layer-cells. But batteries will need at least several dozen layers in order to work in EVs — a fact that leads many in the battery industry to be skeptical about QuantumScape’s claim of developing a battery that could power EVs within the next four years.

Scaling up the battery from a single cell to a full battery pack could be a much more difficult task. “Even though a material may look really promising at the small scale, in the scale-up these defects could become a bigger problem,” said Venkat Srinivasan, the director of the Argonne Collaborative Center for Energy Storage Science, according to Wired.

 “Real-world operation is very different from lab-scale operation.”

QuantumScape’s developments have only been seen in the lab and are still years away from commercialization.

A Long, Crowded Road Ahead

The battery field has recently seen an explosion in competition — there are many different types of solid-state batteries in development, and QuantumScape isn’t the only startup working on this problem. This is great news —battery development is complex and hard, and the demand for more efficient and safer batteries is only expected to grow over the next decade.

“The solid-state battery competitive landscape is becoming increasingly crowded due to the huge potential that solid-state batteries have in enabling vehicle electrification,”  Doug Campbell, CEO of Solid Power, a Colorado-based battery start-up told Wired. 

“This ultimately leads to EVs with greater range, greater reliability, and lower cost.”

We’d love to hear from you! If you have a comment about this article or if you have a tip for a future Freethink story, please email us at tips@freethink.com.

Related
Tesla Superchargers will soon work with Ford and GM EVs
Ford and GM vehicles will be able to use the 12,000 Superchargers in early 2024, helping potentially set a new charging standard.
Delta debuts spaces for passengers with wheelchairs
Passengers who use a power wheelchair have a uniquely arduous air travel experience. But a new seat looks to change that.
Why EV growth in US could be much faster than expected
Consumer preferences and technological trends suggest that most buyers will be ready to choose an EV by 2030.
Why has no one broken the land speed record for 25 years?
Two groups are competing to be the first to create a 1,000-mph car, which would shatter the current land speed record.
New “tandem” solar cell breaks world record
A new tandem solar cell containing layers of silicon and perovskite has demonstrated an unprecedented efficiency of 33.7%.
Up Next
space based solar power
Subscribe to Freethink for more great stories